The 25-kDa linear polyethylenimine exerts specific antiviral activity against pseudorabies virus through interferencing its adsorption via electrostatic interaction.

Pseudorabies virus (PRV) is the causative agent of Aujeszky's disease, which is responsible for enormous economic losses to the global pig industry. Although vaccination has been used to prevent PRV infection, the effectiveness of vaccines has been greatly diminished with the emergence of PRV variants. Therefore, there is an urgent need to develop anti-PRV drugs. Polyethylenimine (PEI) is a cationic polymer and has a wide range of antibacterial and antiviral activities. This study found that a low dose of 1 µg/mL of the 25-kDa linear PEI had significantly specific anti-PRV activity, which became more intense with increasing concentrations. Mechanistic studies revealed that the viral adsorption stage was the major target of PEI without affecting viral entry, replication stages, and direct inactivation effects. Subsequently, we found that cationic polymers PEI and Polybrene interfered with the interaction between viral proteins and cell surface receptors through electrostatic interaction to exert the antiviral function. In conclusion, cationic polymers such as PEI can be a category of options for defense against PRV. Understanding the anti-PRV mechanism also deepens host-virus interactions and reveals new drug targets for anti-PRV.IMPORTANCEPolyethylenimine (PEI) is a cationic polymer that plays an essential role in the host immune response against microbial infections. However, the specific mechanisms of PEI in interfering with pseudorabies virus (PRV) infection remain unclear. Here, we found that 25-kDa linear PEI exerted mechanisms of antiviral activity and the target of its antiviral activity was mainly in the viral adsorption stage. Correspondingly, the study demonstrated that PEI interfered with the virus adsorption stage by electrostatic adsorption. In addition, we found that cationic polymers are a promising novel agent for controlling PRV, and its antiviral mechanism may provide a strategy for the development of antiviral drugs.

Establecimiento del esquema de purificación de los antígenos de SOBERANA®02, SOBERANA®Plus y SOBERANA 01 / Establishment of the purification scheme for SOBERANA®02, SOBERANA®Plus and SOBERANA 01 antigens

La urgente necesidad de desarrollar y producir vacunas seguras y efectivas para garantizar la reducción de la propagación del coronavirus de tipo 2 causante del síndrome respiratorio agudo severo, hizo que el Centro de Inmunología Molecular y el Instituto Finlay de Vacunas, desarrollaran dos vacunas y un candidato vacunal contra la COVID-19, que tienen como componente la molécula del dominio de unión al receptor (aa 319-541) del virus. Para establecer el proceso productivo, se realizaron experimentos en los posibles pasos del proceso de purificación de la molécula del dominio de unión al receptor (aa 319-541), con vistas a su posterior transferencia tecnológica a escala industrial. Dicha molécula está fusionada con una etiqueta de hexahistidina en su extremo C-terminal y presenta nueve residuos de cisteína en su secuencia que forman cuatro enlaces disulfuros intramoleculares, quedando una cisteína libre que permite obtener dos moléculas: dimérica y monomérica, antígenos que forman parte de las vacunas SOBERANA®02 y SOBERANA®Plus y el candidato vacunal SOBERANA 01. Se determinaron las mejores condiciones de adsorción de las matrices cromatográficas de afinidad por quelatos metálicos, intercambio catiónico y exclusión molecular. Se evaluó el desempeño del proceso a escala piloto y se caracterizó la molécula de acuerdo a sus propiedades físico-químicas y biológicas. Los resultados obtenidos mostraron un 60,02 ± 5,15por ciento de recuperación total de la proteína de interés, con más del 98% de pureza en ambas moléculas, una eficiente remoción de contaminantes y una antigenicidad mayor del 90por ciento referido al monómero control del dominio de unión al receptor con 99 por ciento de pureza, lo que demuestra que el proceso establecido es eficiente en la obtención de un producto con la calidad requerida(AU)

The urgent need to develop and produce safe and effective vaccines to guarantee the reduction of the spread of the type 2 coronavirus that causes severe acute respiratory syndrome, led the Center for Molecular Immunology and the Finlay Vaccine Institute to develop two vaccines and one candidate vaccine to combat the 2019 coronavirus pandemic. As part of the establishment of the production process, experiments were carried out on the possible steps of the purification process of the receptor binding domain molecule (aa 319-541) with a view to its subsequent technological transfer on an industrial scale. This molecule is fused with a hexahistidine tag at its C-terminal end and has nine cysteine residues in its sequence that form four intramolecular disulfide bonds; leaving a free cysteine that allows two molecules to be obtained: dimeric and monomeric, which constitute the antigens of the SOBERANA®02 and SOBERANA®Plus vaccines and the SOBERANA 01 vaccine candidate. The best adsorption conditions of the chromatographic matrices of affinity for metal chelates, cationic exchange and molecular exclusion were determined. The performance of the process was evaluated on a pilot scale and the molecule was characterized according to its physical-chemical and biological properties. The results obtained showed a 60.02 ± 5.15percent total recovery of the protein of interest with more than 98% purity in both molecules, an efficient removal of contaminants and an antigenicity greater than 90percent referred to the control monomer of the domain receptor binding with 99% purity; which demonstrates that the established process is efficient in obtaining a product with the required quality(AU)

Uso de quitina e quitosana como adsorventes de amônia de efluentes aquícolas: revisão de literatura / Use of chitin and quitosan as adsorvents of ammonia of aquaculture effluents: a literature review / Uso de quitina y quitosana como adsorbentes de amonia de efluentes acuícolas: revisión de literatura

Os resíduos provenientes da aquicultura são derivados da ração e da excreção dos peixes e podem estar sedimentados, suspensos ou dissolvidos, ocasionando elevados valores de DBO, DQO, nitrogênio e fósforo. A produção de camarões no Brasil tem gerado elevadas quantidades de resíduos sólidos, tendo em vista que os exoesqueletos dos camarões correspondem a cerca de 40% do seu peso total, resultando num forte impacto ambiental. Diversas pesquisas envolvendo a quitina estão sendo desenvolvidas na área de tratamento de água, devido principalmente a sua capacidade de formar filme, sendo utilizada em sistemas filtrantes. Este polissacarídeo também pode ser utilizado como agente floculante no tratamento de efluentes, como adsorvente na clarificação de óleos, e principalmente na produção de quitosana. Atualmente a quitosana possui aplicações multidimensionais, desde áreas como a nutrição humana, biotecnologia, ciência dos materiais, indústria farmacêutica, agricultura, terapia genética e proteção ambiental. A quitosana é muito eficiente na remoção de poluentes em diferentes concentrações. Apresenta alta capacidade e grande velocidade de adsorção, boa eficiência e seletividade tanto em soluções que possuem altas ou baixas concentrações. O uso da biotecnologia, através do processo de adsorção utilizando adsorventes naturais e baratos, como a quitina e quitosana, minimiza os impactos ambientais da aquicultura tanto em relação aos provocados pelo lançamento de efluentes no meio ambiente quanto aos causados pelo descarte inadequado dos resíduos do processamento de camarões.(AU)

Aquaculture residues are derived from fish feed and excretion and may be sedimented, suspended or dissolved, resulting in high BOD, COD, nitrogen and phosphorus values. Shrimp production in Brazil has generated high amounts of solid waste, since shrimp exoskeletons account for about 40% of their total weight, resulting in a strong environmental impact. Several researches involving chitin are being developed in the area of water treatment, mainly due to its ability to form film, being used in filter systems. This polysaccharide can also be used as a flocculating agent in the treatment of effluents, as an adsorbent in the clarification of oils, and especially in the production of chitosan. Currently, chitosan has multidimensional applications, from areas such as human nutrition, biotechnology, materials science, pharmaceutical industry, agriculture, gene therapy and environmental protection. Chitosan is very efficient in the removal of pollutants at different concentrations. It presents high capacity and high adsorption velocity, good efficiency and selectivity both in solutions that have high or low concentrations. The use of biotechnology, through the adsorption process using natural and cheap adsorbents such as chitin and chitosan, minimizes the environmental impacts of aquaculture both in relation to those caused by the release of effluents into the environment and those caused by the inappropriate disposal of processing residues of shrimps.(AU)

Los residuos procedentes de la acuicultura se derivan de la ración y de la excreción de los peces y pueden estar sedimentados, suspendidos o disueltos, ocasionando elevados valores de DBO, DQO, nitrógeno y fósforo. La producción de camarones en Brasil ha generado grandes cantidades de residuos sólidos, teniendo en cuenta que los exoesqueletos de los camarones corresponden a cerca del 40% de su peso total, resultando en un fuerte impacto ambiental. Varias investigaciones involucrando la quitina se están desarrollando en el área de tratamiento de agua, debido principalmente a su capacidad de formar película, siendo utilizada en sistemas filtrantes. Este polisacárido también puede ser utilizado como agente floculante en el tratamiento de efluentes, como adsorbente en la clarificación de aceites, y principalmente en la producción de quitosana. Actualmente la quitosana posee aplicaciones multidimensionales, desde áreas como la nutrición humana, biotecnología, ciencia de los materiales, industria farmacéutica, agricultura, terapia genética y protección ambiental. La quitosana es muy eficiente en la eliminación de contaminantes en diferentes concentraciones. Presenta alta capacidad y gran velocidad de adsorción, buena eficiencia y selectividad tanto en soluciones que poseen altas o bajas concentraciones. El uso de la biotecnología, a través del proceso de adsorción utilizando adsorbentes naturales y baratos, como la quitina y quitosana, minimiza los impactos ambientales de la acuicultura tanto en relación a los provocados por el lanzamiento de efluentes en el medio ambiente en cuanto a los causados por el descarte inadecuado de los residuos del procesamiento de camarones.(AU)

Iron from nanostructured ferric phosphate: absorption and biodistribution in mice and bioavailability in iron deficient anemic women.

Food fortification with iron nanoparticles (NPs) could help prevent iron deficiency anemia, but the absorption pathway and biodistribution of iron-NPs and their bioavailability in humans is unclear. Dietary non-heme iron is physiologically absorbed via the divalent metal transporter-1 (DMT1) pathway. Using radio- iron isotope labelling in mice with a partial knockdown of intestine-specific DMT1, we assessed oral absorption and tissue biodistribution of nanostructured ferric phosphate (FePO4-NP; specific surface area [SSA] 98 m2g-1) compared to to ferrous sulfate (FeSO4), the reference compound. We show that absorption of iron from FePO4-NP appears to be largely DMT1 dependent and that its biodistribution after absorption is similar to that from FeSO4, without abnormal deposition of iron in the reticuloendothelial system. Furthermore, we demonstrate high bioavailability from iron NPs in iron deficient anemic women in a randomized, cross-over study using stable-isotope labelling: absorption and subsequent erythrocyte iron utilization from two 57Fe-labeled FePO4-NP with SSAs of 98 m2g-1 and 188 m2g-1 was 2.8-fold and 5.4-fold higher than from bulk FePO4 with an SSA of 25 m2g-1 (P < 0.001) when added to a rice and vegetable meal consumed by iron deficient anemic women. The FePO4-NP 188 m2g-1 achieved 72% relative bioavailability compared to FeSO4. These data suggest FePO4-NPs may be useful for nutritional applications.

Sol-gel-derived hard coatings from tetraethoxysilane and organoalkoxysilanes bearing zwitterionic and isothiazolinone groups and their antifouling behaviors.

Current environmentally friendly marine antifouling (AF) coatings are mainly polymeric with a relatively low hardness. Hard sol-gel-derived AF coatings for underwater robot-cleaning are seldom used. In this work, two new organoalkoxysilanes, i.e., (N-methoxyacylethyl)-3-aminopropyltriethoxysilane and 2-(2-hydroxy-3-(3-(trimethoxysilyl)propoxy)propyl)benzo[d]isothiazol-3(2H)-one, were synthesized by a facile method. These two precursors were used with tetraethoxysilane (TEOS) to produce three series of hybrid AF coatings with zwitterionic group (Z-χ), antibacterial group (1,2-benzisothiazolin-3-one) (A-χ) and zwitterionic and antibacterial groups (S-χ) by a sol-gel process. The hardness of the coatings was measured using a pencil hardness tester and the AF behaviors of the coatings were examined by laboratory and field assays. A pencil hardness up to 5 H was achieved and slight deterioration was observed after 9 months of immersion in artificial seawater for the A-χ and S-χ coatings at a sufficiently high TEOS content. A synergistic effect between the zwitterion and antimicrobial agents existed but was not obvious. A higher TEOS content led to a higher hardness and better AF performance regardless of the type of AF group. Even with the same biofilm formation after field assay, coatings with a higher TEOS content exhibited a better resistance to mussel settlement.

Modification of Magnetite Nanoparticles with Triazine-Based Dendrons and Their Application as Drug-Transporting Systems.

The following research aims at the synthesis of magnetite nanoparticles functionalized with triazine-based dendrons and the application of the obtained materials as effective sorptive materials dedicated to acidic bioactive compounds. The adopted synthetic approach involved: (1) the synthesis of nanosized Fe3O4 particles via classic co-precipitation method, (2) the introduction of amine groups on their surface leading to materials' precursor, and (3) the final synthesis of branched triazine-based dendrons on the support surface by an iterative reaction between cyanuric chloride (CC) and piperazine (p) or diethylenetriamine (DETA) via nucleophilic substitution. The characterized materials were tested for their adsorptive properties towards folic acid, 18ß-glycyrrhetinic acid, and vancomycin, showing high adsorption capacities varying in the ranges of 53.33-401.61, 75.82-223.71, and 68.17-132.45 mg g-1, respectively. The formed material-drug complexes were also characterized for the drug-delivery potential, performed as in vitro release studies at pH 2.0 and 7.4, which mimics the physiological conditions. The release profiles showed that the proposed materials are able to deliver up to 95.2% of the drugs within 48 h, which makes them efficient candidates for further biomedical applications.

New insight on some selected nanoparticles as an effective adsorbent toward diminishing the health risk of deltamethrin contaminated water.

Deltamethrin is a widely used insecticide that kills a wide variety of insects and ticks. Deltamethrin resistance develops as a result of intensive, repeated use, as well as increased environmental contamination and a negative impact on public health. Its negative impact on aquatic ecology and human health necessitated the development of a new technique for environmental remediation and wastewater treatment, such as the use of nanotechnology. The co-precipitation method was used to create Zn-Fe/LDH, Zn-AL-GA/LDH, and Fe-oxide nanoparticles (NPs), which were then characterized using XRD, FT-IR, FE-SEM, and HR-TEM. The kinetic study of adsorption test revealed that these NPs were effective at removing deltamethrin from wastewater. The larval packet test, which involved applying freshly adsorbed deltamethrin nanocomposites (48 hours after adsorption), and the comet assay test were used to confirm that deltamethrin had lost its acaricidal efficacy. The kinetics of the deltamethrin adsorption process was investigated using several kinetic models at pH 7, initial concentration of deltamethrin 40 ppm and temperature 25°C. Within the first 60 min, the results indicated efficient adsorption performance in deltamethrin removal, the maximum adsorption capacity was 27.56 mg/L, 17.60 mg/L, and 3.06 mg/L with the Zn-Al LDH/GA, Zn-Fe LDH, and Fe Oxide, respectively. On tick larvae, the results of the freshly adsorbed DNC bioassay revealed larval mortality. This suggests that deltamethrin's acaricidal activity is still active. However, applying DNCs to tick larvae 48 hours after adsorption had no lethal effect, indicating that deltamethrin had lost its acaricidal activity. The latter result corroborated the results of the adsorption test's kinetic study. Furthermore, the comet assay revealed that commercial deltamethrin caused 28.51% DNA damage in tick cells, which was significantly higher than any DNC. In conclusion, the NPs used play an important role in deltamethrin decontamination in water, resulting in reduced public health risk. As a result, these NPs could be used as a method of environmental remediation.

Serum apolipoprotein A-I depletion is causative to silica nanoparticles-induced cardiovascular damage.

The rapid development of nanotechnology has greatly benefited modern science and engineering and also led to an increased environmental exposure to nanoparticles (NPs). While recent research has established a correlation between the exposure of NPs and cardiovascular diseases, the intrinsic mechanisms of such a connection remain unclear. Inhaled NPs can penetrate the air-blood barrier from the lung to systemic circulation, thereby intruding the cardiovascular system and generating cardiotoxic effects. In this study, on-site cardiovascular damage was observed in mice upon respiratory exposure of silica nanoparticles (SiNPs), and the corresponding mechanism was investigated by focusing on the interaction of SiNPs and their encountered biomacromolecules en route. SiNPs were found to collect a significant amount of apolipoprotein A-I (Apo A-I) from the blood, in particular when the SiNPs were preadsorbed with pulmonary surfactants. While the adsorbed Apo A-I ameliorated the cytotoxic and proinflammatory effects of SiNPs, the protein was eliminated from the blood upon clearance of the NPs. However, supplementation of Apo A-I mimic peptide mitigated the atherosclerotic lesion induced by SiNPs. In addition, we found a further declined plasma Apo A-I level in clinical silicosis patients than coronary heart disease patients, suggesting clearance of SiNPs sequestered Apo A-I to compromise the coronal protein's regular biological functions. Together, this study has provided evidence that the protein corona of SiNPs acquired in the blood depletes Apo A-I, a biomarker for prediction of cardiovascular diseases, which gives rise to unexpected toxic effects of the nanoparticles.

Interaction of multicomponent anionic liposomes with cationic pyridylphenylene dendrimer: Does the complex behavior depend on the liposome composition?

Dendrimers are individual macromolecular compounds having a great potential for biomedical application. The key step of the cell penetration by dendrimers is the interaction with lipid bilayer. Here, the interaction between cationic pyridylphenylene dendrimer of third generation (D350+) and multicomponent liquid (CL/POPC), solid (CL/DPPC) and cholesterol-containing (CL/POPC/30% Chol) anionic liposomes was investigated by dynamic light scattering, fluorescence spectroscopy, conductometry, calorimetric studies and molecular dynamic (MD) simulations. Microelectrophoresis and MD simulations revealed the interaction is electrostatic and reversible with only part of pyridinium groups of dendrimers involved in binding with liposomes. The ability of dendrimer molecules to migrate between liposomes was discovered by the labeling liposomes with Rhodamine B. The phase state of the lipid membrane and the incorporation of cholesterol into the lipid bilayer were found to not affect the mechanism of the dendrimer - liposome complex formation. Rigid dendrimer adsorption on liposomal surface does not induce the formation of significant defects in the lipid membrane pave the way for possible biological application of pyridylphenylene dendrimers.

Lubricin-Inspired Loop Zwitterionic Peptide for Fabrication of Superior Antifouling Surfaces.

Biofouling represents great challenges in many applications, and zwitterionic peptides have been a promising candidate due to their biocompatibility and excellent antifouling performance. Inspired by lubricin, we designed a loop-like zwitterionic peptide and investigated the effect of conformation (linear or loop) on the antifouling properties using a combination of surface plasma resonance (SPR), surface force apparatus (SFA), and all atomistic molecular dynamics (MD) simulation techniques. Our results demonstrate that the loop-like zwitterionic peptides perform better in resisting the adsorption of proteins and bacteria. SFA measurements show that the loop-like peptides reduce the adhesion between the modified surface and the modeling foulant lysozyme. All atomistic MD simulations reveal that the loop-like zwitterionic peptides are more rigid than the linear-like zwitterionic peptides and avoid the penetration of the terminus into the foulants, which lower the interaction between the zwitterionic peptides and foulants. Besides, the loop-like zwitterionic peptides avoid the aggregation of the chains and bind more water, improving the hydrophilicity and antifouling performance. Altogether, this study provides a more comprehensive understanding of the conformation effect of zwitterionic peptides on their antifouling properties, which may contribute to designing novel antifouling materials in various biomedical applications.

A mesoporous melamine/chitosan/activated carbon biocomposite: Preparation, characterization and its application for Ni (II) uptake via ion imprinting.

A novel imprinted biocomposite and its non-imprinted form were developed by melaminating and crosslinking of chitosan coated onto a bio-based activated carbon and characterized using FTIR, BET, FESEM-EDS and XRD. Nickel, 4-Toluenesulfonyl chloride, and glutaraldehyde were used as a template, converter of hydroxyl and amine groups to good leaving groups, and cross-linker, respectively. The factors affecting adsorptivity and imprinting factor were optimized by using the Taguchi method for the subsequent comparative adsorptivity, kinetics, isotherms, selectivity, and reusability studies of imprinted biocomposite with its non-imprinted one. The pseudo-first-order and Langmuir models were best fitted to the experimental kinetics and equilibrium isotherm data, respectively. The maximum Ni (II)) adsorptivity of 109.86 mg/g, the imprinting factor (I·F) of 5.45 and Ni (II) selectivity coefficients values of 3.13, 4.48, 3.72, 2.51 for Ni (II) toward Zn (II), Cd (II), Cu (II) and Pb (II), respectively, were obtained at optimum conditions. After five consecutive adsorption-desorption cycles, the biocomposites still presented a high adsorptivity (>83%), indicating their excellent reusability.

Ionic chitosan/silica nanocomposite as efficient adsorbent for organic dyes.

A new adsorbent from chitosan and anionic silica was prepared by ionic interaction followed by sol-gel process. The obtained nanocomposite was characterized by different techniques: FTIR, XRD, SEM/EDX, TGA, and TEM. The results showed that silica precursor interacts with chitosan and deposits as regular spherical nanoparticles. The methylene blue (MB) adsorption by chitosan/silica nanocomposite achieved the adsorption equilibrium within 60 min. The adsorption method is fitted to the pseudo-second-order kinetic model and the Langmuir adsorption model with a maximum adsorption capacity of 847.5 mg/g at slight alkaline solution. Chitosan/silica composite displayed high regeneration capability and recovery of MB up to five cycles without the loss of the adsorption efficiency. The current study showed that as-prepared chitosan/silica nanocomposite is an appropriate material for the adsorption of organic pollutants from wastewater.

Amino acid-functionalized chitosan beads for in vitro copper ions uptake in the presence of histidine.

One of the hallmarks of Alzheimer's Disease (AD) is the anomalous binding involving amyloid-ß (Aß) peptide and metal ions, such as copper, formed through histidine (His) residues. Herein, adsorption experiments were performed to test the in vitro ability of chitosan to uptake copper ions in the presence of histidine. The characterization of the beads was assessed before and after the adsorption process by scanning electron microscope, X-ray diffraction and Fourier-transform infrared spectroscopy. Amino acid functionalization of chitosan-based beads promoted an increase in the copper ions adsorption capacity (2.47 mmol of Cu(II)/gram of adsorbent). Nevertheless, depending on the order of addition of histidine to the system, different adsorption behaviors were observed. The kinetics showed that, once the Cu(II)-His bond was established, functionalized beads were less efficient to capture Cu(II), which promoted a decrease in the overall adsorption capacity. However, when chitosan and histidine were simultaneously added to the Cu(II) solution, there was no decrease in adsorption capacity. To sum up, chitosan-based materials are an interesting model to provide a better understanding on the biomolecules­copper interactions that occur in AD, as well as a possible chelating agent that can interfere in the bonds between Aß residues and copper ions.

Steric and energetic characterizations of mouse and human musk receptors activated by nitro musk smelling compounds at molecular level: Statistical physics treatment and molecular docking analysis.

Understanding olfaction process at a microscopic or molecular level needs more elucidation of the multiple stages involved in the olfaction mechanism. A worth full elucidation and a better understanding of this molecular mechanism, a necessary preamble should be achieved. The content of this work is a preamble for that. A study of the mouse and human olfactory receptors activation in response to two nitro musks stimuli, which are the musk xylol and the musk ketone, are considered here, first, for their wide expanded use in perfumery, but also to show some particular aspects of this process in the case of these two stimuli, which could help to deduce more details and more general aspects in the global olfactory mechanism. A statistical physics modeling using the monolayer model with two independent types of receptor binding sites of the response of the mouse olfactory receptor MOR215-1 and the human olfactory receptor OR5AN1, which are identified as specifically responding to musk compounds, is used to characterize the interaction between the two nitro musk molecules, the mouse and the human olfactory receptors and to determine the olfactory band of these two odorants through the determination of the molar adsorption energies and the adsorption energy distributions. The physico-chemical model parameters can be used for the steric characterization via the calculation of the receptor site size distributions. The docking computation between these two nitro musks and the human olfactory receptor OR5AN1 is performed demonstrating a large similarity in receptor-ligand detection process. Thus, docking finding results prove that the calculated binding affinities were belonging to the spectrum of adsorption energies.

Gold-Polyoxoborates Nanocomposite Prohibits Adsorption of Bacteriophages on Inner Surfaces of Polypropylene Labware and Protects Samples from Bacterial and Yeast Infections.

Bacteriophages (phages) are a specific type of viruses that infect bacteria. Because of growing antibiotic resistance among bacterial strains, phage-based therapies are becoming more and more attractive. The critical problem is the storage of bacteriophages. Recently, it was found that bacteriophages might adsorb on the surfaces of plastic containers, effectively decreasing the titer of phage suspensions. Here, we showed that a BOA nanocomposite (gold nanoparticles embedded in polyoxoborate matrix) deposited onto the inner walls of the containers stabilizes phage suspensions against uncontrolled adsorption and titer decrease. Additionally, BOA provides antibacterial and antifungal protection. The application of BOA assures safe and sterile means for the storage of bacteriophages.

Particulate matter exposure exacerbates susceptibility to SARS-CoV-2 infection in humanized ACE2 mice.

The global outbreak of coronavirus disease 2019 (COVID-19), which is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), as of 8 May 2021, has surpassed 150 700 000 infections and 3 279 000 deaths worldwide. Evidence indicates that SARS-CoV-2 RNA can be detected on particulate matter (PM), and COVID-19 cases are correlated with levels of air pollutants. However, the mechanisms of PM involvement in the spread of SARS-CoV-2 remain poorly understood. Here, we found that PM exposure increased the expression level of angiotensin-converting enzyme 2 (ACE2) and transmembrane serine protease 2 (TMPRSS2) in several epithelial cells and increased the adsorption of the SARS-CoV-2 spike protein. Instillation of PM in a hACE2 mouse model significantly increased the expression of ACE2 and Tmprss2 and viral replication in the lungs. Furthermore, PM exacerbated the pulmonary lesions caused by SARS-CoV-2 infection in the hACE2 mice. In conclusion, our study demonstrated that PM is an epidemiological factor of COVID-19, emphasizing the necessity of wearing anti-PM masks to cope with this global pandemic.

Preparation and characterization of carboxymethylcellulose based citric acid cross-linked magnetic aerogel as an efficient dye adsorbent.

A low-cost, collectable, and efficient material is essential for adsorbing water pollution, such as dyes and heavy metal ions pollution. In this work, we proposed a novel strategy for the preparation of an efficient and collectable magnetic aerogel as adsorbent for dye. The magnetic aerogels were prepared from sodium carboxymethylcellulose (CMC) hydrogel using citric acid (CA) as the crosslinker, followed by vacuum freeze-drying technique to obtain aerogels. The effects of magnetic Fe3O4 nanoparticle contents on the adsorption properties of the aerogels were investigated. The results show that the as-prepared magnetic composite aerogels exhibit porous structure and display good adsorption and collectable performance for methylene blue (MB) in water with the removal rate of 97.5% in 6 h. The maximum compress strength and absorption capacity of the magnetic aerogel with 1 wt% Fe3O4 nanoparticle loading for MB is 0.13 MPa and 83.6 mg/g, respectively. Aerogels with Fe3O4 nanoparticles exhibited magnetism which enables the aerogels to easily collect. This excellent structure stability and collectability guarantees long-term integrity and floatability of the magnetic aerogels in water.

Volcanic Rock Materials for Defluoridation of Water in Fixed-Bed Column Systems.

Consumption of drinking water with a high concentration of fluoride (>1.5 mg/L) causes detrimental health problems and is a challenging issue in various regions around the globe. In this study, a continuous fixed-bed column adsorption system was employed for defluoridation of water using volcanic rocks, virgin pumice (VPum) and virgin scoria (VSco), as adsorbents. The XRD, SEM, FTIR, BET, XRF, ICP-OES, and pH Point of Zero Charges (pHPZC) analysis were performed for both adsorbents to elucidate the adsorption mechanisms and the suitability for fluoride removal. The effects of particle size of adsorbents, solution pH, and flow rate on the adsorption performance of the column were assessed at room temperature, constant initial concentration, and bed depth. The maximum removal capacity of 110 mg/kg for VPum and 22 mg/kg for VSco were achieved at particle sizes of 0.075-0.425 mm and <0.075 mm, respectively, at a low solution pH (2.00) and flow rate (1.25 mL/min). The fluoride breakthrough occurred late and the treated water volume was higher at a low pH and flow rate for both adsorbents. The Thomas and Adams-Bohart models were utilized and fitted well with the experimental kinetic data and the entire breakthrough curves for both adsorbents. Overall, the results revealed that the developed column is effective in handling water containing excess fluoride. Additional testing of the adsorbents including regeneration options is, however, required to confirm that the defluoridation of groundwater employing volcanic rocks is a safe and sustainable method.

Pectin/lignocellulose nanofibers/chitin nanofibers bionanocomposite as an efficient biosorbent of cholesterol and bile salts.

A new biosorbent Ca-crosslinked pectin/lignocellulose nanofibers/chitin nanofibers (PLCN) was synthesized for cholesterol and bile salts adsorption from simulated intestinal fluid during gastric-intestinal passage. The physico-chemical properties of PLCN were studied using SEM, FTIR, XRD, DSC and BET. Before gastrointestinal passage, PLCN had an amorphous single-phase, compact structure formed via hydrogen and van der Waals bonds that revealed an irregular shape with the shriveled surface but watery condition and enzymatic digestion led to create a porous structure without destruction because of the water-insoluble nanofibers, therefore increasing the adsorption capacity. The maximum adsorption capacity reached 37.9 and 5578.4 mg/g for cholesterol and bile salts, respectively. Freundlich isotherm model indicated the reversible heterogeneous adsorption of both cholesterol and bile salts on PLCN. Further, their adsorption followed pseudo-second order kinetic model. These results suggest that PLCN has potential as a gastrointestinal-resistant biosorbent for cholesterol and bile salts adsorption applicable in medicine and food industry.

3D Metal-Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis, Crystal Structures, Gas Adsorption, and Magnetic Properties.

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2'-bithiophen-5,5'-dicarboxylate (btdc2-) [Co3(btdc)3(bpy)2]·4DMF, 1; [Co3(btdc)3(pz)(dmf)2]·4DMF·1.5H2O, 2; [Co3(btdc)3(dmf)4]∙2DMF∙2H2O, 3 (bpy = 2,2'-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co3(RCOO)6}, connected either by btdc2- ligands (1, 3) or by both btdc2- and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N2, O2, CO, CO2, CH4 adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m2⋅g-1 and promising gas separation performance with selectivity factors up to 35.7 for CO2/N2, 45.4 for CO2/O2, 20.8 for CO2/CO, and 4.8 for CO2/CH4. The molar magnetic susceptibilities χp(T) were measured for 1 and 2 in the temperature range 1.77-330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are µeff (300 K) ≈ 4.93 µB. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.